DA-GEN
Dryden Aqua Generator
Your benefits at a glance
- Best oxidation with free radicals
- Safe, low-cost and ecological disinfection
- Very low chlorine level - low korrosion risk
- Fully automatic water treatment control and remote access with integrated WiFi module
- Healthy and beautiful water thanks to our Activator based on Magnesium chloride
- Completes the Dryden DAISY® with a desinfection stage
Swim in drinking water!
What is the DA-GEN?
The DA-GEN is an innovative disinfection solution for your swimming pool. It is a Hydrolyser that uses advanced oxidation technology to generate free radicals and small amounts of chlorine. It also serves as your complete swimming pool controller.
The free radicals serve as the primary oxidants. The chlorine is only used for the depot desinfection in the pool. We run the system with a very low amount of salt (3 - 5 times less than salt water pools). Because the lower the concentraion of salt, the more free radicals and the less chlorine is produced. This technology only works in combination with Dryden DAISY® and will produce water in drinking water quality!
How does the DA-GEN work?
For hydrolytic cleavage of water molecules to free radicals and production of the appropriate amount of free chlorine, we require water with a certain conductivity. Conductivity depends on the quantity of minerals in the water (TDS). The lower the conductivity, the more free radicals and other oxygen compounds and the fewer chlorine atoms are produced.
As we want to maximise the production of free radicals and minimise the production of chlorine for residual disinfection, we maintain water conductivity at the lowest possible level. With a conductivity of only 1.0 – 1.5 mS, the DA-GEN will produce enough free radicals as well as enough chlorine for residual disinfection.
Instead of using regular salt (NaCl), we recommend the use of the Dryden Aqua Activator based on Magnesium Chloride (MgCl2). Our Activator not only raises conductivity to the desired level, it also improves filtration and assists in removal of phosphates from the water. Phosphates are required for algae and bacteria to feed. Only 1 kg of DA-GEN Activator per cubic metre of pool water volume is required. This small amount also ensures that chloride levels remain below 600ppm, the corrosion limit for V4A (316) stainless steel.
Instead of using regular salt (NaCl), we recommend the use of the Dryden Aqua Activator based on Magnesium Chloride (MgCl2). Our Activator not only raises conductivity to the desired level, it also improves filtration and assists in removal of phosphates from the water. Phosphates are required for algae and bacteria to feed. Only 1 kg of DA-GEN Activator per cubic metre of pool water volume is required. This small amount also ensures that chloride levels remain below 600ppm, the corrosion limit for V4A (316) stainless steel.
Main features
- High performance Hydrolysis unit
- Primary disinfection with Free Radicals
- Low corrosion risk
- Low chlorine level and therefore low desinfection by-products
- Complete controller for your pool system:
- pH measurement and automatic dosing
- Free chlorine (or Redox) measuring and control
- Pump and backwash control (programmable)
- Temperature sensor
- Automatic dosing of APF®
- Control the pool lights
- Optional: salinity probe, dosing pump for ACO® or chlorine
- Always with WIFI - check and control your pool on your mobile phone or your computer -> www.DA-GEN.com
Perfect dosing - perfect control - perfect solution
On our new download section
Contact us
Production, Research & Development
Butlerfield Ind. Est Bonnyrigg
Edinburgh
EH19 3JQ
United Kingdom
Mail: info@drydenaqua.com
Phone: +44 1875 822222
Sales & Distribution
Industriering 68
4227 Büsserach
Switzerland
Mail: sales@drydenaqua.com
Phone: +41 61 789 91 80
Find a distributor
Dryden Aqua Pools DistributorsWater Treatment Distributors
Aquaria & Aquaculture Distributors
Social
FacebookYoutube
Webdesign by Bönzli + Feuz IT